ALL IN ONE densifier, dust-proofer, hardener, finishing aid is a one component water based colloidal silica solution. This product is designed for interior and exterior use to densify Portland Cement based products.

These surfaces include but are not limited to concrete floors, walls, driveways, sidewalks, precast, masonry, and natural stone.

ALL IN ONE reacts with any free lime not assimilated in the process of hydration, converting it to a gel like substance that fills the pores of cementitious surfaces.  Use as finishing aid when bull floating, power troweling or hand troweling. Use while finishing in place of water. • Increases surface strength by 30% or more

• improved abrasion and wear resistance
• Stops dusting and efflorescence
• Greatly reduces the potential for Alkali Silica Reaction (ASR) and “chert pops”
• Does not alter appearance of concrete substrate
• Helps “save the slab”
• Greatly improves finish-ability while using bull float, power trowel, or hand trowel
• Lubricates trowel blades for better finishing
• Aids with the finishing of shake-on hardeners
• Reduces potential for checking, crazing, scaling, and curling
• A true finishing aid, eliminates the need to use water during the finishing process

ALL IN ONE coverage rates will depend on jobsite conditions, porosity, finish and application technique. Before floating or troweling, test ALL IN ONE on a sample section to determine appropriate application rate and technique before applying to entire project area.

Use these coverage rates as a starting point to determine necessary application rate:

Rough Broom Finish............................... 200 sf/gallon
Light Broom Finish...................................300 to 400 sf/gallon
Steel Hand Trowel Finish ...…….............300 to 500 sf/gallon
Steel Power Trowel Finish…………….......400 to 600 sf/gallon
Polished Concrete 400 grit................... 500 to 600 sf/gallon
Polished Concrete 800 grit................... 600 to 800 sf/gallon